Description
Ideal as a dependable ‘one-board quiver’ with the speed you need to perform at your peak combined with the stability required to stay upright and focused on the task at hand. Featuring full carbon construction for lightweight, rigidity and maximum speed, the Racer series are competition-level boards that excel in flatwater, open ocean, beach and downwind race conditions. A full nose outline with lowered profile is ideal for penetrating chop in rough conditions as well as reducing cross-wind interference. The wide cockpit standing area allows for full use of the deck area and provides a ‘corrugated’ design for added rigidity and durability. Rail edges in the rear of the board are slightly rounded and combined with a relaxed tail rocker for minimal drag.
The Racer 14′ is available in two widths, 23″ and 25″
| LENGTH | WIDTH | THICKNESS | ONE FEET OFF NOSE WIDTH | ONE FEET OFF TAIL WIDTH | VOLUME | WEIGHT | WEIGHT RANGE |
|---|---|---|---|---|---|---|---|
| 427 cm | 58 cm | 17 cm | 33 cm | 29 cm | 245 L | 10.8 kg | 80 kg |
| LENGTH | WIDTH | THICKNESS | ONE FEET OFF NOSE WIDTH | ONE FEET OFF TAIL WIDTH | VOLUME | WEIGHT | WEIGHT RANGE |
|---|---|---|---|---|---|---|---|
| 427 cm | 63 cm | 17 cm | 36 cm | 32 cm | 266 L | 11.7 kg | 95 kg |
- Fins set up : Single Fin
- Center Fin : C-TEC 9″ Touring
TECHNOLOGY
CUSTOM TECHNOLOGY FOR MINIMUM WEIGHT WITH MAXIMUM PERFORMANCE
Our C-TEC “Custom”-Technology was developed to create the ultimate light weight, high-performance boards while maintaining good impact resistance. The success of this construction is due to the combination of Carbon-Innegra weave fabric* throughout the entire board together with a light weight low density foam core. A brushed white finish provides added durability, protection from overheating in the sun and reduced weight.
*Carbon-Innegra fabric blends the lightweight and stiffness of carbon with the durability and waterproof impact resistance of Innegra.
Key Features :
- Lightweight EPS foam cores for minimum weight.
- Racer : Uni-Direction Carbon for minimum weight, maximum stiffness and performance.
- Localized reinforcement for key impact areas, improving durability in specific areas while minimizing weight overall.
- Brushed matt finish for improved glide, protection from the sun.
- Diamond groove pad for maximum traction.
1 – Deck Pad
2 – 100g/m2 woven fiberglass
3 – 200g/m2 woven carbon Innegra
4 – 200g/m2 woven fiberglass
5 – 200g/m2 woven carbon reinforcement patch in standing area
6 – 16 kg/m3 Molded, Watertight EPS Foam Core
7 – 100g/m2 woven fiberglass
8 – 200g/m2 woven carbon Innegra
9 – 100g/m2 woven fiberglass
